Location :  Home  >  News  >  Technology

Some Tips to Edge Gravel Walkways

( Date: 2013-12-26 15:36:29 )

A gravel walkway offers a casual, low-maintenance path through your yard. Inexpensive and simple to install, gravel walkways present few challenges for do-it-yourselfers. Once the walkway is installed, its most common problems have one simple solution. Adding edging to the walkway blocks encroaching grass and also keeps gravel from scattering into the lawn. Installing edging is a simple project you can finish in a day.


                                                   Some Tips to Edge Gravel Walkways


Instructions as follows:


Firstly, decide on the type of edging material. For a structured look, or to add definition to the walkway, use natural stones, bricks or pavers.

Secondly, measure the width of the edging material, and mark an equal distance from the edge of the walkway with a tape measure and garden stakes. Wind a string around the stakes down the length of both sides of the walkway.

Thirdly, rake back the gravel from the sides of the walkway. Unearth dirt and grass within the outlined space with a shovel, and keep digging for 4 inches if you're edging with paving stones or pavers. Tamp down the dirt at the bottom with the back of a hoe or a tamper tool.

Fourthly, pour 2 inches of coarse masonry sand along the trench and tamp it down.

Fifthly, set the bricks or natural stones in the trench side by side, or set the bricks end to end lengthwise for a narrower border. Place the materials flush together, leaving as little space as possible between them. Hit each brick or stone with a hammer to embed it in the bed of sand and make the pieces level with each other. Continue setting the materials until the trench is filled.


From: Stone industry news

Support Center: Tel:86-592-5959630/638/512  Fax:86-592-5959611  E-mail:info@gogostone.com  skype: gogostonecom
Copyright GOGOstone.com All Rights Reserved